Check Out our
Facebook Page

 

Home

Hours

Contact Us

Site Map

Dumper Dogg Inserts

Kubota RTV

Kubota

Lift Dogg Lift Gates

Tractor Attachments

Tractor Rental

Truck Star Work
Truck Gear


Used Equipment

Municipal Salt Spreaders

Tractor Loader Snow Plows

Salt Dogg Spreaders

Scoop Dogg Snow Pushers

Snow Dogg Snow Plows

Snow Plow & Salt Spreader Parts

Curtis Tractor Cabs

Tractor Weather Cabs

Lebanon Turf Grass Seeds




 


Salt Dogg Spreader 2013

We Ship SaltDogg Spreaders and Parts
Throughout the United States.
Call for Pricing: (419) 865-8820

Click The Salt Spreader You Are Interested in Below
1. Tailgate Salt Spreaders
2. Bulk Salt Hopper Spreaders
3. Undertailgate Salt Spreaders

4. Walk Behind Salt Spreaders

5. ATV Spreaders

 

                                                               2013 PRICING

WB100 Walk Behind Spreader

• One piece fully-welded  steel frame.
• Large 1.5 cu. ft. polymer hopper.
• Capacity: 100 lbs of bagged salt, sand, or other free flowing materials.
• Large 13" pneumatic tire make pushing through slush and ice a breeze.
• Adjustable 3 flap poly deflector for controlled spreading width

PRICE - $179.00 plus shipping

                                                          

 

TGSUVPROA Tailgate Spreader

Ideal for residential/light commercial applications
Dimensions:40.5"H x 22.5"W x 20.5"D
• Features an attractive and rugged polymer black hopper and orange powder coated steel mounting frame.
• Fold-away feature—simply release hitch pin and spreader folds away for easy access to rear door or tailgate.
• Capacity: 4.413 cubic feet/331 pounds #1 rock salt or similar material.
• Heavy-duty sealed ball bearing 1/6 HP spreader motor with with direct-to-battery wire harness.
• Material flow up to 30 feet controlled from an in-cab variable speed control.
• Ultra-smooth hopper interior, in addition to the auger design, provide for easy flow material flowand reduce material "bridging".
• Comes complete with all mounting hardware for 2"receiver hitches.
                             PRICE - $ 639.99 plus shipping

 

TGSO5B Tailgate Spreader

Commercial grade salt spreader features a low-profile design for unrestricted rear view & a protected iternal motor assembly.
Dimensions:40.1"H x 54.3"W x 27.3"D
• Attractive and rugged polymer black hopper and orange powder coated steel mounting frame to resis rust and corrosion.
• Capacity: 10.79 cubic feet/809 pounds #1 rock salt or similar material.
• Heavy-duty 12-volt spreader is housed in a seal motor chamber. The motor is located inside the hopper for extra protection.
• Material flow and spreader and spreader width, from 3ft. to 30ft. are controlled from an in-cab electronic spreader control panel.
• Ultra-smooth hopper interior, in addition to the auger design, provide for east material flow and reduced material "bridging".
                                     PRICE - $1049.00 std. mount  plus shipping

                                                  $1309.00 hitch mount       "

                                                  $1,359.00 swing away mount   "

 

TGSO6 Tailgate Spreader

Dimensions: 45" H x 52" W x 27" D
• Rotationally molded double-wall construction requires no welded steel framework.
• Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber inside the hopper for extra protection.
• Concealed 80 lb. vibrator.
• Mount directly to 2" hitch receiver or to bumper (includes universal stake pocket attachment and mounting hardware).
• Forward pivoting non-removable lid with self-latching handle.
• Molded-in hopper handles.
• Easy to assemble.
• Easy to use flow-gate design.
• Material flow & spread width, from 3' to 30' controlled from an in-cab electronic spreader control panel.
• Easy maintenance (motor replacement).
• Capacity: 10 cu. ft. #1 rock salt or similar material.
• Lighter weight unit for higher load capacity.
                            PRICE - $ 1049.00 plus shipping

 

                                                TGS07 Tailgate Spreader
Combines the robustness of an auger-driven V-Box spreader with the simplicity and easy mounting of a tailgate spreader.  The open-auger design gives contractors the option to spread a variety of materials, typically limited to V-Box spreaders.
Dimensions: 46" H x 53" W x 31.5" D
• Capacity: 11 cu. ft./825lbs. (Salt or Sand)
• Class 4 Receiver Hitch Mounting with Horizontal & Vertical Adjustment, no bed rail drilling
• 12-Volt DC Dual Shaft Gear Motor
• Front and Rear Pivoting Hinged Lid for Easy Filling
• 9" Polymer Spinner
• Horizontal Auger Feed Mechanism
• Variable Speed Controller with Vibrator Switch
• 3ft. - 25ft. Spread Width
• Polyethylene/Steel Construction
• Vehicle Application: 3/4-Ton & 1-Ton Trucks

                            PRICE - $1559.00 plus shipping

 

Electric Hopper Spreaders

General –The SaltDogg® spreaders is a completely self-contained, ultra-durable spreader unit designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix, and is also ideal for broadcsting seed, fertilizer, game feed, etc. The complete assembly mounts easily on utility vehicles, or ¼-ton pickups, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY – An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.

SHPE0750: Overall Length, 53"; Width, 48"; Capacity Struck, 0.6 cu. yd.; Capacity Rounded, 0.75 cu. yd.; Recommended use, Utility Vehicles or compact pickups.

PRICE - $ 2,599.00  plus shipping

SHPE1500: Overall Length, 92" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5"; Height, 37.5"; Recommended use, 3/4 or 1-Ton trucks.
PRICE - $ 2,999.00 plus shipping

SHPE2000 & SHPE2000X (Extended Chute): Overall Length, 96" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 2.00 cu. yd.; Width, 47.5"; Height, 40"; Recommended use, 3/4 or 1-Ton trucks above 8,500 lbs. GVWR.
PRICE - $ 3,299.00 std. chute plus shipping

              $ 3,399.00  ext. chute plus shipping 

SHPE3000: Overall Length, 123.7"; Capacity Struck, 3 cu. yd.; Width, 48"; Height, 52.7 "; Recommended use, 1-Ton trucks above 13,000 lbs. GVWR.

PRICE - $ 5,399.00 plus shipping

SHPE4000: Overall Length, 100"; Capacity Struck, 4 cu. yd.; Width, 74"; Height, 43"; Recommended use, 1-Ton Dump Bodies above 15,000 lbs. GVWR.

PRICE - $ 7199.00 plus shipping

1400601SS: Stainless Steel Slide -in Electric Spreader:

Overall Length, 113"; Capacity Struck, 2.0 cu. yd.; Width 47"; Height 33"; Recommended use, 3/4 or 1-Ton

8' bed trucks. In cab variable speed controller for spinner, chain drive. Shipped with top grate and tie down straps. Quick disconnect spinnner assembly.
PRICE - $ 3,699.00 plus shipping

 

 

Under Tailgate Spreaders

    

  • Direct Drive, 15 GPM Motor Operation
  • Spread Pattern of 4' to 40' of Rock Salt, Free-Flowing Granular Material or Chemicals
  • 6" Auger with 3/8" Flighting
  • Hydraulic Safety Lockout System
  • 18" Polyurethane Spinner with 7 GPM Motor

92420A: 96" Carbon Steel Hydraulic Drive

PRICE - $ 1,799.00 plus shipping

92420SSA: 96" 304 Stainless Steel Hydraulic Drive

PRICE - $ 2,599.00 plus shipping

  • Two Ultra-Quiet 12-volt DC Direct-Drive Motors Power the Auger and Spinner
  • Spread Pattern of 4' to 25' of Rock Salt, Free-Flowing Granular Material or Chemicals
  • 14" Polyurethane Spinner and Mounting Plates

92440SSA: 96" Stainless Steel Electric Drive

PRICE - $ 3,599.00 plus shipping

9035000 Electric Drive Replacement Tailgate Spreader

  • All Stainless Steel Body Construction
  • 12VDC Spinner Motor 54AMP/620RPM
  • 12VDC Auger Gear Motor 50AMP/30RPM
  • Spread Pattern of 4' to 25' of Rock Salt, Free-Flowing Granular Material or Chemicals
  • 14" Polyurethane Spinner
  • Dual-Flight Auger with Mixing Tines
  • Two Augers
  • Overall Dimensions: 64.5"W x 31"H x 16.5"D
  • Weighs 420lbs
  • Fits 1-Ton / Super Duty Dump Bodies

PRICE - $ 3,599.00 plus shipping

 

 

 
Toledo Ohio Web Site Design By Webcasters.com
Copyright 2010 Crosby Equipment & Ohio Media, Inc.
Toledo Ohio Web Site Hosting By Webcasters.com