Buyers Products Spreaders

Buyers SUV & Tailgate & Walk behind Spreaders

Walk Behind Spreaders

Rugged design…smooth operation.
Large 1.5 cu. ft polymer hopper — Capacity: 100 lbs of bagged salt, sand, or other free flowing materials

Large 13” tires make pushing through slush and ice a breeze.
Large flow regulator on handle offers ease of operation with gloves.
Solid control linkage eliminates sticking and stretched cables.
3-flap adjustable poly deflector controls spread pattern (ideal for sidewalks, near sensitive foliage, etc.).
Ergonomic variable height handle.
Rust proof polymer hopper screen helps prevent material jamming.
Includes a durable plastic rain cover to protect from moisture and spillage.
Heavy duty gearbox protects gears from the elements.
Steel axle, agitator shaft and linkage for reliable operation.

WB-100B Steel: $199.00 plus Shipping

SUV Tailgate Spreaders

TGSUV1 (Residential Use) $449.95 plus shipping

Ideal for the home owner/residential user.The adjustable spread path is designed for one-pass coverage of driveways and access roads.
Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber. Includes cigarette plug adapter.
Material flow from 12' to 14' controlled from an in-cab on–off control.
Comes complete with all mounting hardware for 1-1/4" and 2" receiver hitches.

TGSUVPRO ( Light Commercial Use) $599.95 plus shipping

Ideal for residential/light commercial applications.
Heavy-duty sealed ball bearing motor with direct-to-battery wire harness
Material flow up to 30 feet controlled from an in-cab variable speed control.
Comes complete with all mounting hardware for 2" receiver hitches.

TGS05B $1069.00 bumper mnt.

$1199.00 hitch mnt.

$1299.00 swing mnt.

plus shipping

Commercial grade spreader features a low-profile design for unrestricted read view and a protected internal motor assembly.

Dimensions:40.1"H x 54.3"W x 27.3"D
Attractive and rugged thermoplastic black hopper and orange powder coated steel mounting frame resist rust and corrosion.
Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber. (TGS05A is located inside the hopper for extra protection).
Material flow and spread width,from 3 feet to 30 feet are controlled from an in-cab electronic spreader control panel.
Ultra-smooth 45º hopper interior and auger fight material bridging by channeling it to the stainless steel-lined hopper throat and stainless steel spinner,providing and even flow of material without the need of expensive auger add-ons or vibration kits.
Capacity:9 cubic feet/600 pounds #1 rock salt or
similar material

Mounting options:

Mount directly to the step bumper (standard, all
mounting hardware included)
Mount using the optional Wintergate Spreader Mount allowing full bed access
Mount using a standard receiver tube for easy spreader removal. Kit also allows for vertical adjustment

Part No. Description Weight
TGSUV1A SUV Tailgate Spreader 65.0 lbs.
TGSUVPROA SUV Tailgate Spreader, Professional 69.0 lbs.
TGS05A Tailgate Spreader, Low Profile 165.0 lbs.

return to top

Buyers Hopper Spreaders

Electric Hopper Spreader

IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
General –The SHPE series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper (1500 series only) makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY – An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
SHPE1500 & SHPE1500X: Overall Length, 92" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5"; Height, 37.5"; Recommended use, 3/4 or 1-Ton trucks.
SHPE2000 & SHPE2000X: Overall Length, 96" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 2.00 cu. yd.; Width, 47.5"; Height, 40"; Recommended use, 3/4 or 1-Ton trucks above 8,500 lbs. GVWR.

SHPE1500

-Sale Price: $2,849.00 plus Shipping

SHPE2000 EXT. CHUTE

-Sale Price: $3,499.00 plus Shipping

return to top

Buyers Under Tailgate Spreaders

HEAVY DUTY COMMERCIAL AND MUNICIPAL APPLICATIONS.

Available in orange powder coated carbon steel or stainless steel models.

Direct drive operation reduces numbers of moving parts,assuring dependable service.

Under tailgate mounting allows normal use of dump body without interference from spreader.

Rugged 7-gauge trough has 3-point hinged bottom cover that provides easy access to entire auger assembly for easy,one-person cleanout.

Buyers 92420SS Under Tailgate Spreader Spreads from 4' to 40' of rock salt, free-flowing granular materials or chemicals.

Auger is supported by 1-1/4"steel shaft ends and has right and left flighting to the discharge port delivering a continuous,consistent flow of spreading material.

Sealed,self-aligning 1-1/4"diameter radial bearings with grease fittings.

Low-speed,high-torque orbital motors

Spreader assemblies come with material trough, auger assembly, spinner and auger motors, spinner assembly, polyurethane spinner and mounting plates (as shown in photos above)

Model 92420A: $1,599.00 plus Shipping

Model 92420SSA: $2,299.00 plus Shipping

return to top

Crosby Equipment • Toledo, Ohio • (419) 865-8820